Provides a dust sealed temporary doorway for concealment of work areas. Transparent for safety and to allow light to pass through. CAUTION: Polythene should not be used when hot paint stripping.
Timco Protective Zipper Door 2.1×1.2m
• Ideal for building works
• Protects from dust & dirt
• Water resistant
Size | 15mm, 22mm |
---|
Related products
Timco Box of 100 Solo Woodscrews PZ2 CSK ZYP
• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length
Timco Classic Screw Mixed Tray ZYP (895 pcs)
• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Patented lubrication, designed to enhance screw insertion time and provides greater resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• Surface hardened up to 750 HV to prevent torque shearing under load and a core hardness of up to 450 HV for improved ductility
• Single slash on 25mm+ to reduce torque and the likelihood of the timber splitting when the screw is inserted close to the edge
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length
Timco Skelgun Silicone Gun
• 2.3mm strengthened side plates and a 6mm gripper plate
• Riveted front cap for reinforcement and integrated cleaning pin
• Convenient hook end for hanging
• 7:1 trigger ratio
• 534g approximate gun weight
• Suitable for cartridges up to 380ml
Timco Ceiling Angle Bracket 25 x 25 x 22 x 1mm (100pcs)
Versatile bracket most commonly used for installing suspended ceiling systems. Various hole sizes allow different fixings to be used.
Timco 4.5 x 60 Decking Screw PZ2 Green (200pcs)
• Ribs under head for improved countersinking
• Helix shank for removing debris and to improve clamping
• 25° sharp point and single lead for a fast start and improved thread acceptance
Timco SDS Plus Hammer Bit
• Fully heat treated to eliminate bending
• Shot blast finish for rust protection
• Most popular sizes up to 600mm length
Timco 18.0 x 450 SDS Plus Hammer Bit
• Special nickel chromoly shank
• High quality BC20 Tungsten Carbide tip
• Cold formed blanks utilised up to 11mm diameter
• Fully heat treated to eliminate bending
• Twin flute design for increased drilling performance
• Shot-peened for increased strength and durability
• PGM approved and marked
• Large range of sizes to cover most drilling applications, including direct fix anchors
Timco 1.8kg Multi Purpose Powder Filler
• Easy to mix, apply and sand
• Shrinking and cracking resistant
• Fills up to 10mm per layer
• Sets in 2 hours
• Smooth finish
• Dries white
• Suitable for interior and exterior use
• Suitable for interior & exterior use
Timco Instant Contact Adhesive Spray
• The low odour formula has been developed to bond with a wide variety of substrates
• Suitable for plastic, PVCu, rubber, ceramic, metal, glass, wood, MDF, paper, card, fabric, formica, stone, concrete, cork, linoleum, leather & porcelain
• Forms an extremely strong instant bond once the two surfaces have been joined
• Heat resistant to +90°C
Timco Chisel SDS Plus 20x250mm
• Heat treated
• Shot blast finish for rust protection
Timco Drywall Screw PH2 Coarse Grey (1000pcs)
• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold
• Fire Classification – A1
Timco Box of 200 Solo Woodscrews PZ2 CSK ZYP
• Double countersunk reduces the likelihood of head shear and assists completion of countersinking
• Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion
• 40° deep single thread to provide a secure fixing with high pull-out resistance
• 25° sharp point and single lead for a fast start and improved thread acceptance
• All sizes up to and including 75mm are fully threaded and lengths 80mm and above all have 70mm thread length
Reviews
There are no reviews yet.