A multi-purpose plaster based repair compound. Designed to remove all interior defects on plaster, brick, wood and most other common building materials. After setting it can be sanded and painted and sets hard enough to accept screws and nails.
Timco 1.8kg Multi Purpose Powder Filler
• Easy to mix, apply and sand
• Shrinking and cracking resistant
• Fills up to 10mm per layer
• Sets in 2 hours
• Smooth finish
• Dries white
• Suitable for interior and exterior use
• Suitable for interior & exterior use
Size | 15mm, 22mm |
---|
Related products
Timco Heavy Duty Rubble Sacks 60x90cm (10pcs)
• Ideal for building waste
• Tough & reusable
• Tear resistant
Timco S2 Driver Bits 2 x 25 PZ
• S2 grade hardened steel for longer life
Timco Mixed Cable Ties (200 pcs)
• Tested in accordance with BS EN 62275
Timco Drywall Screw PH2 Coarse Grey (1000pcs)
• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• Coarse thread for extreme hold
• Fire Classification – A1
Timco Instant Contact Adhesive Spray
• The low odour formula has been developed to bond with a wide variety of substrates
• Suitable for plastic, PVCu, rubber, ceramic, metal, glass, wood, MDF, paper, card, fabric, formica, stone, concrete, cork, linoleum, leather & porcelain
• Forms an extremely strong instant bond once the two surfaces have been joined
• Heat resistant to +90°C
Timco Skelgun Silicone Gun
• 2.3mm strengthened side plates and a 6mm gripper plate
• Riveted front cap for reinforcement and integrated cleaning pin
• Convenient hook end for hanging
• 7:1 trigger ratio
• 534g approximate gun weight
• Suitable for cartridges up to 380ml
Timco Protective Zipper Door 2.1×1.2m
• Ideal for building works
• Protects from dust & dirt
• Water resistant
Timco PU Foam Applicator Gun
• Stainless steel non-blocking valve prevents foam curing inside the applicator
• Polypropylene hand grip enhances stability & gun control
• Lubricated trigger for a smooth & precise foam flow
• Heavy duty steel body for long lasting performance
Timco 750ml Expand PU Foam Gun Grade
• 4 hours fire resistance
• BS 476-20
• EN 1366-4
• EN 13501
• DIN 4102-1
• Fast curing
• For 30 and 60 minute fire door applications, use Fire & Acoustic Seals Fire Door Foam (FAS-750G)
Timco SDS Plus Hammer Bit
• Fully heat treated to eliminate bending
• Shot blast finish for rust protection
• Most popular sizes up to 600mm length
Timco 18.0 x 450 SDS Plus Hammer Bit
• Special nickel chromoly shank
• High quality BC20 Tungsten Carbide tip
• Cold formed blanks utilised up to 11mm diameter
• Fully heat treated to eliminate bending
• Twin flute design for increased drilling performance
• Shot-peened for increased strength and durability
• PGM approved and marked
• Large range of sizes to cover most drilling applications, including direct fix anchors
Timco 5L PVA Bond
• Fully conforms to BS 5270
• When used neat is ideal as a general purpose wood adhesive
Reviews
There are no reviews yet.